Same-day collection available · call to check Call 01603 734766 Mobile 07786 134004

Home  /  How to measure

How to measure your foam

Getting your sizes right is the most important part of ordering foam cut to size. This guide covers rectangles, wedges, curves and paper templates, and what to do when your old cushion is the best guide you've got.

White tape measure coiled on a light surface

Before you start

You don't need special tools, but a few simple things make it much easier to get an accurate measurement:

  • A metal tape measure. Cloth tapes stretch and give a slightly different reading each time.
  • A pen and paper to sketch each piece and write the sizes on.
  • For templates: a large sheet of paper, card or lining paper, scissors and some masking tape.

Measure in centimetres if you can, and say which units you've used. Measure everything twice. It takes a minute and saves a second trip.

Measuring a rectangle or square

  1. Length: measure along the longest edge, from end to end.
  2. Width: measure from front to back. Check it at both ends. If the two measurements are different, the piece isn't a true rectangle, so follow the wedge steps below.
  3. Thickness: measure the depth of foam you want, from bottom to top.
  4. Write it down as length × width × thickness, and note how many pieces you need at that size.

How to write your sizes

Sofa seat cushion × 3: 60 × 58 × 12 cm

Bench pad × 1: 140 × 38 × 5 cm

Dining chair pad × 6: 42 × 40 × 4 cm

Measuring a wedge or angled piece

There are two kinds of angled piece. Some are wedge-shaped in thickness, such as a seat that's deeper at the back than the front. Others are angled in shape, such as a boat berth or a bay window cushion that's narrower at one end.

  1. Sketch the piece from above and label each side with a letter.
  2. Measure every side separately and write the size next to its letter.
  3. Measure the depth from front to back, straight across, at the widest point.
  4. For wedges in thickness, measure the thickness at the thickest and thinnest edges.
  5. If there are more than one or two angles, make a paper template instead. It's quicker and far more reliable.

Measuring round and curved shapes

For a round cushion, such as a stool top, measure the diameter straight across the middle at its widest point. Measure again at a right angle to the first measurement. If the two are different, it's an oval, so give us both sizes.

For curved fronts, rounded corners and anything freehand, a paper template is the best option. Curves are very hard to describe with numbers alone.

Making a paper template

A template is simply a full-size paper copy of the shape you need. It's the most accurate way to order awkward shapes, and it's easier than it sounds.

  1. Lay a sheet of paper or card over the seat or space and tape it down so it can't move.
  2. Run a pencil firmly around the edge, or crease the paper along it with your thumbnail.
  3. Cut the shape out and test it in place. Trim or add paper until it fits exactly.
  4. Mark which side is the top and which edge is the front, and write the thickness you want on it.
  5. Bring the template in, or lay it on the floor next to a tape measure, take a photo from directly above and upload it with the quote form.

Using your old cushion as a guide

Your old cushion can be the best guide you have, but foam shrinks and sags over time, so measure with care.

  • If the old foam is still in good shape, unzip the cover and measure the foam itself.
  • If it has shrunk or crumbled, measure the cover laid flat from seam to seam instead, or measure the space the cushion sits in.
  • Take the thickness from an edge that hasn't been sat on, not from the middle where it has flattened.
  • If you're not sure, bring the old cushion or cover in and we'll measure it with you.

Measuring the thickness

If your cover has a side panel, often called a gusset or boxing, its height is a starting point rather than the final answer. A cushion often needs foam thicker than its border, because the foam swells into the middle of the cover. Foam that only matches the border can leave a deep cushion sitting loose in its cover.

If you're unsure, just give us a call, or bring the cushion in and we'll look at the cover with you. If you're starting from scratch, tell us what the foam is for and we'll suggest a thickness that suits it.

Ready to send your sizes?

Send us your measurements, a sketch or a photo of your template, and we'll call you back with a price. If you're unsure, just give us a call, or bring your old cushion in and we'll sort it out with you. Same-day collection available.